Expert Answers about Forest River Flagstaff Classic Super Lite Fifth Wheel
- Replacement Hub-Drum Assemblies And Brake Assemblies For A Dexter 8-201 Hub Assembly
- The Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ you were looking at is likely what you'll need for your 8-201 hubs but it wouldn't hurt to doublecheck some measurements. First being axle capacity, this hub assembly is designed for 5,200lb to 6,000lb axles. You'll be able to find the capacity of the axles on the axle tag that should be somewhere on the axle tube.
From there you'll want to check the bolt pattern for the wheel studs to make sure that it matches up with your wheels,...
view full answer... - Can a Goose Box Replace a Reese Revolution Pinbox?
- Yes, you can replace a Reese Revolution with a Reese Goose Box like item # RP85FR . The Reese Revolution pin box is the same pin box as the Reese Sidewinder. It is called a Revolution when it comes as OEM equipment on a trailer. The Sidewinder/Revolution pin box has multiple mounting holes to fit many different brands of pin boxes.
You will need to confirm your pin box before you purchase your Reese Goose Box. The one you were looking at item # RP85FR fits a Lippert 1621 pin box.
We...
view full answer... - Replacement Braking Assemblies for 2011 Flagstaff Classic Super Lite with AL-KO Axles
- Yes, the Dexter Electric Trailer Brake Kit part # 23-26-27 will fit AL-KO Axles. They use the same four bolt pattern as Dexter does for the 3,500 lb model so there will be no issues.
view full answer... - Replacement Gearbox for Venture Landing Gear
- For your Venture landing gear with a worn out gear box, what you need is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602.
I have added a link to a video review as well.
view full answer... - Lippert High Speed Stabilizer Jack Mounting Hole measurements.
- Good question, I did some research on this.
**Lippert High-Speed Power Stabilizer Jack - Black Waterproof Switch Kit - 30" Lift # LC298707.
The mounting locations on this unit are 68-11/16" from center-hole to center-hole. If you can get a measurement of your current units mounting locations this will let you know if they are spaced the same.
The parts department at Lippert tells me that the mounting holes are 16.81 inches apart on the ends.
So the mounting holes are 68-11/16 inches...
view full answer... - Will the Lippert Thin Shade Still Operate with a Screen Door?
- Because the Lippert Thin Shade Complete Window Kit # LC806621 installs in your RV or Camper's door, as long as the screen door doesn't rest against the door, it will not be affected by the screen door being closed; additionally, the shade is recessed and protected by an outer "lip" of sorts around the window, so even with some contact the shades will operate. To install the Thin Shade kit, you will need to cut a hole in your RV door 15" wide x 24" tall to fit this window in the door.
view full answer... - Will Metal Lid Replace Plastic Roof Vent Lid with Continous Metal Hinge
- Yes, if you have the same continous hinge on your roof vent as the metal lid part # BV0534-00 this lid will work well as a replacement.
I attached an install video for this for you to check out as well.
view full answer... - Can Plastic Trailer Roof Vent Lid with Continuous Hinge Be Replaced with Metal Lid
- Generally speaking, if the hinge is the same then you can use pretty much any replacement lid as the sizes are all standard. Therefore, the metal Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent part # BV0534-00 should work for you since it uses a continuous hinge.
That said, there can be issues with the arm when switching from a dome to a wedge shape or vice versa so that something to keep in mind
view full answer... - Replacement Roof Vent for a 2010 Gulf Stream Conquest Ultra-Lite 24BH
- The standard roof vent size opening is 14-1/4" wide x 14-1/4" long. This is the case for around 95% of trailers on the market today but you may want to take a quick measurement just to be sure. I have attached a list of our roof vents that will fit a 14-1/4" wide x 14-1/4" long opening for you.
If you are just looking for a standard vent then I recommend the Ventline Ventadome Trailer Roof Vent part # V2092SP-25. This vent has a hand-operated crank handle for easy use, removable screen...
view full answer...
Go To Results